Installation manual

92 Card Setup
Magnetic Stripe Verify Element
Use the following information to define properties of a Magnetic Stripe Verify
Element.
Trailing Encode Fill
Type
The type of fill (Clock, Erase) to be used after the data is
written
Track Data Repeat
Count
The number of times that the data string is to be repeated
Track Data Repeat
Fill Type
The type of fill (Clock, Erase) to be used between the
repeated data strings (only editable if more than one repeat
count is selected)
Track Data Repeat
Separation
The distance between the repeated data strings (only
editable if more than one repeat count is selected)
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.
Settings Tab Properties
Name The name of the Magnetic Stripe Verify Element
Side The side of the card (Front or Back) on which the operation is
to occur
Track Type The track type
Write Level Standard
(Coercivity)
The coercivity standard (Lo, Hi, JIS) (Alternately, you can
select the specific write current (in mA) from the list.) Click the
icon to select Data Field information for this operation.
Track Data Manually enter the track data into the text field or click the
icon to select Data Field, Feedback Field, or Runtime
Composite information for this operation.
Advanced Tab Properties
Leading Encode Fill
Type
The type of fill (Clock, Erase) to be used before the data is
written
Trailing Encode Fill
Type
The type of fill (Clock, Erase) to be used after the data is
written
Track Data Repeat
Count
The number of times that the data string is to be repeated