Installation manual

94 Card Setup
Contact Smart Card Element
Use the following information to define the properties of a Contact Smart Card
Element.
Settings Tab Properties
Name The name of the Contact Smart Card Element
Side The side of the card (Front or Back) on which the operation is
to occur
Format Identifier Four-byte value that identifies the structure of the data
Personalization Data Manually enter the data into the text field or click the icon to
select Data Field, Feedback Field, or Runtime Composite
information for this operation.
Application Select a Smart Card application to use for this operation.
Use Custom Module
Capability
Allows you to split smart card module gang operations, which
ensures that some operations go to a particular gang. The
module capabilities are set in the module’s VPD. At runtime,
the program will attempt to assign the operation to only those
modules with the capability. This feature must be set in
Production Options Setup.
Advanced Tab Properties
Feedback Fields Tab
Source Feedback
Fields
Pre-defined response fields declared by the Smart Card
application. Feedback fields with “$” prefixes appear for
hosted Smart Card Applications. The“$” indicates a built-in
system variable.
Type Field type.
Used Select the check box to use.
Destination
Feedback Fields
The fields into which the value generated by the source fields
are copied
Crypto Devices Tab
Source Crypto
Devices
Logical names of the crypto devices declared by the Smart
Card application
Used Select the check box to use.