Installation manual

Maxsys and MX Series Software Administrator’s Guide 95
Contactless Smart Card Element
Use the following information to define the properties of a Contactless Smart
Card Element.
Local Master Key
Alias
LMK name (alias) of the crypto resource to be used
Key Cards Tab
Logical Key Reader Logical names of the key readers declared by the Smart
Card application
Used Select the check box to use.
Key Card Group
Names
Name of the Key Card Group resource to be used
Initialization Data Tab
Initialization Data Data that initializes the application. Select the Required
check box if necessary and then enter the value in the text
box, or click the icon to select Data Field, Feedback Field, or
Runtime Composite information for this operation.
Preceding Elements Tab
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.
Settings Tab Properties
Name The name of the Contactless Smart Card Element
Side The side of the card (Front or Back) on which the operation is
to occur
Format Identifier Four-byte value that identifies the structure of the data
Personalization Data Manually enter the data into the text field or click the icon to
select Data Field, Feedback Field, or Runtime Composite
information for this operation.