Installation manual

Maxsys and MX Series Software Administrator’s Guide 97
Combi Smart Card Element
Use the following information to define the properties of a Combi Smart Card
Element.
Initialization Data Data that initializes the application. Select the Required
check box if necessary and then enter the value in the text
box or click the icon to select Data Field, Feedback Field, or
Runtime Composite information for this operation.
Preceding Elements Tab
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.
Settings Tab Properties
Name The name of the Combi Smart Card Element
Side The side of the card (Front or Back) on which the operation is
to occur
Format Identifier Four-byte value that identifies the structure of the data
Personalization Data Manually enter the data into the text field or click the icon to
select Data Field, Feedback Field, or Runtime Composite
information for this operation.
Application Select a Smart Card application to use for this operation.
Use Custom Module
Capability
Allows you to split smart card module gang operations, which
ensures that some operations go to a particular gang. The
module capabilities are set in the module’s VPD. At runtime,
the program will attempt to assign the operation to only those
modules with the capability. This feature must be set in
Production Options Setup.
Advanced Tab Properties
Feedback Fields Tab
Source Feedback
Fields
Pre-defined response fields declared by the Smart Card
application. Feedback fields with “$” prefixes appear for
hosted Smart Card Applications. The“$” indicates a built-in
system variable.
Type Field type.