Installation manual

Maxsys and MX Series Software Administrator’s Guide 105
Print Process The process used in the printing operation. This selection
should correspond to the selected Ribbon Set. When
Retransfer Print Technology is selected, along with a ribbon
set and print process, the Settings button will be enabled.
The settings for Spot color print process are: dots-per-inch
(600/1200), Y offset, and grayscale enabled. The setting for
CMY and CMYK setting is Use Color Table.
Z-Order Sets the front to back order of elements on the Z axis. Zero (0)
represents the farthest “back” an image can be. For example
if you want image B to overlap image A, image A’s Z-Order
value would be 0 and image B’s value would be 1.
Advanced Tab Properties
Foreground Opacity Opaque or Transparent.
Background
Opacity
Opaque or Transparent.
Rotation The value (in degrees) that the Text Element should rotate
counterclockwise. Click the icon to select Data Field,
Feedback Field, or Runtime Composite information for this
operation.
Foreground/
Background Color
Click Choose Color to open the color picker with which you
can select the foreground/background color(s).
Scale Select the check box, and then click Modify to scale the
image.
You can manually insert Height and Width values based on
the physical size or percentage of the size of the text. Click
the Proportional by Width/Height check boxes to have the
image adjust proportionally based on the Height or Width
value you enter.
Click the icon to select Data Field information for this
operation.
Tab Group Tab Groups allow you to define and manage tab groups.
Each tab group can define up to nine tab stop positions and
also the tab character (any ASCII character) to use. Tab
positions are measured from the card’s lower left corner. If a
tab position is not valid they will not be used. For more
information, refer to “Manage Tab Groups” on page 86.