Installation manual

106 Card Setup
Barcode Element
Use the following information to define the properties of a Barcode Element.
Element Group Element Groups allow you to split graphic/text/Barcode
element operations between multiple devices. This is done to
improve throughput.
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.
Vision Verification Tab Properties
Use Printing Offset Select the Card Stock Setup to use the printing offset defined
therein. This will ensure that images are centered within the
area as defined in the pattern match.
Quality Check Enter the Pass Threshold value for the Card Stock Setup used
for the Printing Offset above.
Choose the Element Filter value from the list or click the icon
to use Data Field information.
Intensity (default) the color image is converted to a
grayscale image and vision verification is done with that
image. When Red/Green/Blue are selected, the camera will
filter for the selected color channel from the RGB color space
and covert the filtered image to grayscale for use in vision
verification.
Select the contrast type between the characters and the
background on which they are printed. Select Dark on Light if
there is dark text on a light background. Select Light on Dark if
there is light text on a dark background.
Settings Tab Properties
Name The name of the Barcode Element
Side The side of the card (Front or Back) on which the operation is
to occur
X/Y The horizontal and vertical coordinates at which the
operation is to occur. Click the icon to use Data Field
information for the X and Y coordinates.