Installation manual

Maxsys and MX Series Software Administrator’s Guide 109
UltraGrafix Language Element
Use the following information to define the properties of an UltraGrafix
Language Element.
Settings Tab Properties
Name The name of the UltraGraphix Language Element
Side The side of the card (Front or Back) on which the operation is
to occur
Print Technology The technology type (Monochrome Mass Transfer, Color
D2T2, Retransfer)
Graphics Ribbon/
Ribbon Set
(Retransfer)
The ribbon stock to be used in the operation. Enter the value
in the text box or click the icon to use Data Field, Feedback
Field, or Runtime Composite information to select the ribbon
stock. When the Retransfer Print Technology is selected, this
property changes to Ribbon set.
Print Process The process used in the printing operation. This selection
should correspond to the selected Ribbon Set. When
Retransfer Print Technology is selected, along with a ribbon
set and print process, the Settings button will be enabled.
The settings for Spot color print process are: dots-per-inch
(600/1200), Y offset, and grayscale enabled. The setting for
CMY and CMYK setting is Use Color Table.
UGL Data Field UGL Data Field defined in the Data Setup
Add New Override Allows you to override parameters in a UGL Data Field
(Image, Text, Barcode). Select the appropriate option button
and then click Add. An Overrides tab and a Vision
Verification tab are activated and allow you to modify
parameters of the selected UGL.
To define the parameters in the Image, Text, and Barcode
elements, refer to their respective sections in this chapter.
Advanced Tab Properties
Foreground/
Background Color
Click Choose Color to open the color picker with which you
can select the foreground/background color(s).