Installation manual

116 Card Setup
Topping Element
Use the following information to define the properties of a Topping Element.
Settings Tab Properties
Name The name of the Topping Element
Side The side of the card (Front or Back) on which the topping is to
occur
Topping Foil The foil stock to be used in the operation. Click the icon to
select Data Field, Feedback Field, or Runtime Composite
information for this operation.
Advanced Tab Properties
Perform Operation
String
These three fields are related inasmuch as the program
performs the defined operation string using the selected Data
Field on the selected module.
For example: If there are four Topping modules, each module
has a different color foil, and the operation string calls for the
use of silver foil (which is loaded on module 3), you should
select the options accordingly. Operation parameters are
defined in the Data Setup.
Perform Operation
Data Field
Perform Operation
on Module
Clear Perform
Operations Fields
Click Clear to remove all information from the Perform
Operations fields.
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.