Installation manual

Maxsys and MX Series Software Administrator’s Guide 117
Laser Engraving Element
Use the following information to define the properties of a Laser Engraving
Element.
Settings Tab Properties
Name The name of the Laser Engraving Element
Side The side of the card (Front or Back) on which the laser
engraving is to occur
Template Select a template from the list of available templates.
Alternately, you can pull template data from a Data Field,
Feedback Field, or Runtime Composite Field by clicking the
icon to the right and then making a selection.
Show Sample Data Select this check box if you would like sample data displayed
on the virtual card. This is done to provide a visual reference
of how the finished card will look.
Map Templates Click this button to open the Laser Template Mappings
dialog.
Advanced Tab Properties
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.