Installation manual

118 Card Setup
Label Element
Use the following information to define the properties of a Label Element.
Settings Tab Properties
Name The name of the Label Element
Side The side of the card (Front or Back) on which the operation is
to occur
X/Y The horizontal and vertical coordinates at which the
operation is to occur. Click the icon to use Data Field
information.
Coordinate Type Choose Top Left to Top Left or Bottom Left to Bottom Left
Label Stock The label stock to be used in the operation. Click the icon to
select Data Field, Feedback Field, or Runtime Composite
information for this operation.
Advanced Tab Properties
Perform Operation
String
These three fields are related inasmuch as the program
performs the defined operation string using the selected Data
Field on the selected module.
For example: If there are four Label modules, each module
has a different label stock, and the operation string calls for
the use of stock A (which is loaded on module 3), you should
select the options accordingly. Operation parameters are
defined in the Data Setup.
Perform Operation
Data Field
Perform Operation
on Module
Clear Perform
Operations Fields
Click Clear to remove all information from the Perform
Operations fields.
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.