Installation manual

Maxsys and MX Series Software Administrator’s Guide 119
Sticker Element
Use the following information to define the properties of a Sticker Element.
Dynamic OCV Element
Use the following information to define the properties of a Dynamic Optical
Character Verification (OCV) Element.
Settings Tab Properties
Name The name of the Sticker Element
X/Y The horizontal and vertical coordinates (from the bottom left
corner of the card) at which the operation is to occur. Click
the icon to use Data Field information for the X and Y
coordinates.
Advanced Tab Properties
Preceding
Operations
Click Add/Modify to open the dialog from which you can
select the operation(s) to occur before this operation. Use the
arrows to move the operations from one column to the other.
Settings Tab Properties
Name Descriptive name (OCV1 by default)
Side The side of the card (Front or Back) on which the element
appears. Click the icon to select Data Field information for
this operation.
X Horizontal offset (in inches) from the bottom-let corner of the
card. Click the icon to select Data Field information for this
operation.
Y Vertical offset (in inches) from the bottom-let corner of the
card. Click the icon to select Data Field information for this
operation.
Width Width (in inches) of the OCV box. Click the icon to select
Data Field information for this operation.
Height Height (in inches) of the OCV box. Click the icon to select
Data Field information for this operation.