Installation manual

120 Card Setup
X (Ref)/Y (Ref) The reference coordinates (in inches) for the dynamic OCV
element. Click the icon to select Data Field information for
this operation.
Data Characters displayed on the card. Click the icon to select
Data Field information for this operation.
Data Contrast Type Select the contrast type between the characters and the
background on which they are printed
Select Light on Dark if there is a light image on a dark
background. Select Dark on Light if there is a dark image on a
light background. Select Unknown to have the system try to
determine the type. Click the icon to select Data Field
information for this operation.
Font Filename The font of the OCV characters. Click the icon to select Data
Field information for this operation or Browse to select a font.
Font Point Size The size of the font. Enter the value in the text box or click the
icon to select Data Field information for this operation.
Pass Threshold The value at which the OCV item will pass when tested. Enter
the value in the text box or click the icon to select Data Field
information for this operation.
Element Filter Choose the Element Filter value from the list or click the icon
to use Data Field information.
Intensity (default) the color image is converted to a
grayscale image and vision verification is done with that
image. When Red/Green/Blue are selected, the camera will
filter for the selected color channel from the RGB color space
and covert the filtered image to grayscale for use in vision
verification.
Perform Confusion
Analysis
In the Confusion Data List either enter character data or click
the icon to select Data Field information for this operation.
Enter a value for the Confusion Threshold or click the icon to
select Data Field information for this operation.
Use the Test button to perform the Confusion Analysis.
Advanced Tab Properties
Width/Height
Scaling
The degree to which the OCV font characters have been
scaled from their original size
Rotation Degrees The degree to which the OCV font characters will be read
from the X/Y reference point