Installation manual

134 Form Setup
Positioning the Folds
With your mouse, left-click on the fold (or folds, based on the fold type selected)
and hold down to position it vertically on the form. When the mouse button is
held down, position margins are displayed. Cards should not be placed inside
these margins.
Placing and Aligning Cards
1. Select a card type from the left side of the program window and drag it onto
the virtual form. The form boundaries will be displayed to ensure that the
card is not placed too close to the edge. Repeat this step for each card you
want on the form.
Use the rollover function to ensure that there are no problems with the
placement of the cards. If there are problems, an error message and a
cross-out icon will display when you place the mouse cursor over the
card(s).