Installation manual

142 Form Setup
Configuring MXi in Form Setup
Perform the following procedure to configure the MXi job(s) in the Maxsys/MX
Series Form Setup.
When the MXi option is installed, the Envelope Inserter should be enabled
in the system Controller Diagnostics. If you have trouble accessing the MXi
information through Form Setup, make sure it is enabled. Refer to the MXi
Owner Installation Manual for details.
1. Open the Form Setup application. Select Applications | Setups | Form
Setup.
2. In
the Form Setup window under Form Properties, click Edit.
3. In
the Configure MXi dialog box, select the job from the MXi Job list.
4. If you are using selective inserts with MXi, complete the following for each
item listed under the job:
A. Select the Da
ta Field
The data fields listed are determined by the Data Setup that is linked to
the Form Setup.
from the list.
B. E
nter the value in the data stream into the Match String text box. Select the
value that is used in the data stream (this value will be matched to the
insert when it is read). When the value in the Match String equals the
value in the data field, the insert will be processed/fed/included in the
insertion pack.