Installation manual

Maxsys and MX Series Software Administrator’s Guide 147
• Reusable Reject Station—Select if you have a reusable reject station set up in
Diagnostics.
• Finish Rejects—Select to complete the processing of all cards that have errors.
Print on Render Error - Select to print an image on the card even though there is
an error. The system will continue to print everything it can in order to determine
where errors are occurring in the process.
Pause on Image Error - Select to pause the machine when there is an image error.
Print on Form Error - Select to continue printing if there is a form error. The
system will continue to print everything it can in order to determine where errors
are occurring in the process.
Reconfigure Emboss Gangs (Maxsys Only) - Select to automatically reconfigure
emboss gangs. This is done to optimize speed when atypical emboss lines are
encountered during Maxsys production.
Activate Card Flippers - Select to activate all Flipper modules in the system to
rotate cards.
Delete Jobs with all products attempted - Select to automatically delete all jobs
that have had all products attempted, regardless of the outcome (success or
failure).
Intelligent prompting for Smart Supplies - Select to disable the display of
supply prompts, other than those where RFID (Smart Supply) violations exist that
require an explicit override.
Pass Cards Through Smart Card Module - By default this option is checked
when creating a new production options setup. The value of this option has no
effect on jobs with Smart Card operations; cards in Smart Card jobs are always
racked. Cards in a non-Smart Card job will be racked if this option is not checked.
Cards in a non-Smart Card job will pass through if this option is checked.