Installation manual

Maxsys and MX Series Software Administrator’s Guide 177
Roller Stock
Topcoat/Laminate Stock
Topping Foil Stock
Editing Stock Descriptions
Complete the following steps to modify a stock description.
1. Select Applications | Stocks | Stock Management from the menu bar. The
Stock Management window (which contains all stock inventory in the system)
opens.
Parameter Description
Stock Name Unique, descriptive name of the stock
Description A description of the stock
Stock Number The Datacard part number of the stock to be read
by the associated module
Parameter Description
Stock Name Unique, descriptive name of the stock
Description A description of the stock
Stock Number The Datacard part number of the stock to be read
by the associated module
Type The overlay stock type (CardGard, DuraGard, or
Topcoat)
Size (DuraGard only) Size of the overlay media. Select Full if the patch
covers the entire card surface. Select Partial and
then enter the width (in inches) of the patch into
the text box.
Parameter Description
Stock Name Unique, descriptive name of the stock
Description A description of the stock
Stock Number The Datacard part number of the stock to be read
by the associated module