Installation manual

180 Stocks
Card Stock Elements
There are two types of elements that can be placed on the Card Stock, Pattern
Match and Optical Character Verification (OCV). The tables below provide the
parameters for each element type.
Pattern Match
Front/Rear Aspect Ratio The aspect ratio of the imported image (view
only).
Use Camera Setup Use parameters from the camera setup.
Front/Rear Variable
Exposure
The amount of time (in microseconds) that the
verification camera lens will open during the
verification procedure.
Card Stock Laser Receptivity Front/Back Tabs
Parameter Description
Laser Capable Surface Select if the card contains a laser capable
surface. The laser options will become editable.
Origin Offset (X and Y
axes)
The offset from the "layout origin" (bottom left
corner) zero position of the card to the module-
defined zero-position. These values are dependant
on card size and the behavior of the card as it
passes through the module.
Coordinate Offset (X and
Y axes) - front only
X - Axis Inversion Select if the preprint is mirrored on the X axis.
Y - Axis Inversion Select if the preprint is mirrored on the Y axis.
X - Y Axis Exchange Select if the preprint is mirrored on both the X and
Y axes.
Parameter Description
Name Descriptive Name (PatternMatch1 by default)
Side The side of the card (Front or Back) on which the
element appears
X Horizontal offset (in inches) from the bottom-let
corner of the card
Parameter Description