Installation manual

186 Smart Card Management
and then use Key Reader Management to define the key readers and to assign
key cards to key readers.
Crypto Device Management
Crypto Device Management allows you to create entries for multiple crypto
devices and to use custom names to identify the devices. Each cryptographic
device requires a local master key (LMK) in order to encrypt and decrypt other
keys used in the smart card personalization process. Only one LMK at a time can
be used by a crypto device. Use Crypto Device Management to define crypto
devices and specify which will be available for use during the smart card
personalization process.
Adding a Crypto Device
Before creating a crypto device, you must use Local Master Key Management to
enter the LMK Alias and Check Value for the local master key that will be used in
the crypto device. Refer to “Local Master Key (LMK) Management” on page 197.
To add a crypto device, complete the following steps.
1. Once you have configured LMK Aliases, select Applications | Smart Card
Management | Crypto Device Management from the menu bar.
2. Click New (or to modify an existing device, select one and then click Open)
on the toolbar.