Installation manual

Maxsys and MX Series Software Administrator’s Guide 187
3. For name, enter a name for the crypto device.
4. F
or Description, enter a comment that describes the crypto device.
5. Verify that the Available check box is selected to make the crypto device
available for use by personalization applications.
6. F
or Address, enter the IP Address and Port Number of the crypto device.
7. F
or Crypto Type, select the crypto device model number.
8. For
Firmware Indicator, enter the version of firmware you are using.
9. For Default Command, enter a command. A value for the default command
may have been provided. Change it as needed for the crypto device you are
using. The default command is sent to the crypto device only when the Test
button is selected (from the Crypto Device Management application's main
screen).
10. Under Function,
enter the names of the functions supported by the device in
the Name field, and then click Add. Examples are P3, Affina, etc.
11. Cl
ick the Auto-Fetch button. If the crypto device is functioning, the Firmware
Indicator and Check Value fields should be populated with values. Ensure
that the values are the ones you expect for this device.