Installation manual

Maxsys and MX Series Software Administrator’s Guide 213
• To e
nter string or binary FIR information manually using the FIR
Fields box, select FIR Fields. A table with FIR Field and Data Type
information from the job setup is displayed. Data can be entered into
the values field using the keyboard, Cut and Paste, or a file reference
can be added using Browse. For information on the column headings
see the list below.
3. To add and define Records either select the Records Tab or use the Records
Box displayed at the bottom of the screen.
A. The Records Tab shows a table of the Data Fields from Data Setup based
on the job setup. It allows data entry into the values field using the
keyboard, Cut and Paste, or a file reference can be added using Browse.
The column headings indicate data attributes based on the Job Setup.
• Required -
Provided by the data setup.
• Data Field - The Field name provided by the data setup.
• Data Type - Provid
ed by the data setup. For example: String, Binary,
UltraGrafix Language (UGL).
• Value - This is w
here data can be entered.
• E
mpty Field - Indicates that this field content is intended to be empty
or a field was created without content.
• Missing Fi
eld - Indicates that this field is intended to be missing and
therefore no field will be created for the record.