Installation manual

222 Miscellaneous Configuration
Managing the Password for the Datacard
System Default User Name
Datacard Maxsys, MX Series, and PB6500 systems are shipped from the factory
with a default user account defined as follows:
Similarly, Datacard Affina Personalization Manager has a default user account,
defined as follows:
If your organization’s security policies require that passwords be changed on a
regular basis, you must monitor the expiration schedule and reset and
synchronize the passwords manually.
During production, the services listed in “Configuration of Services” on page 219
must be running. Services set up to log on as “.\maxsys” must be set up with the
maxsys user password. Therefore, each time the maxsys user password is
changed, the password information in the Log On tab for these services must also
be changed.
To increase security further, you can set the log on as for these services to use
another server for user authentication. Also, the Controller PC can be added to a
domain.
The Datacard Maxsys service provides FTP services to the personalization
modules. You must allow FTP connections from the personalization modules to
the network adapter, which has an IP address of 172.27.0.254. If you want to use
FTP services in your production environment, you need to setup your FTP server
so it does not interfere with the Datacard Maxsys service.
User Name maxsys
Password datacard
Group Membership DB2ADMINS
General attributes selected Password never expires
User Name ObjectServer
Password datacard
Group Membership DB2ADMINS
General attributes selected Password never expires