Installation manual

Maxsys and MX Series Software Administrator’s Guide 229
Fi f
As mentioned, the Vision Verification module can use either pre-printed graphics
or characters as a basis for generating the Score. To use a pre-printed graphic you
must identify the graphic with a Pattern Match element on the Card Stock Setup.
To use characters that are always the same, you identify the characters with an
Optical Character Verification (OCV) element on the Card Stock Setup or Card
Setup.
If you are using a Card Stock Setup, you must
capture images of the front and
back of the unpersonalized card stock. To use characters that change from one
card to another, use an Optical Character Verification element on the Card Setup.
Procedures for these tasks are described next.
Quick Stock Capture
This utility allows you to capture the front and back images of card stock. These
captured images can be used to create card stock setups.
Procedure
This procedure must be performed at a Maxsys or MX6000 system equipped
with a Vision Verification module.
1. From the menu bar select Applications | Utilities | Vision Utilities.
2. F
or Output Path, enter or browse to the location where you want card images
stored. Select a folder that is backed up during the normal backup processes.
3. From the Stock Template
list, select a Card Stock Setup that matches the
thickness of the cards you are loading. Selecting Open will open the Card
Stock Setup utility.