Installation manual

Maxsys and MX Series Software Administrator’s Guide 245
15. E
nter “black” for the Print Process. (This Print Process will be used for black
text on the card.)
16. From the Ribbon
list, select AVHD_BLACK (Mount Point 4).
17. Fr
om the Add Print Process list, select Blank Color Planes and then click
Add. A fourth tab page appears.
18. E
nter a name for the Print Process, such as “blank”. This Print Process will be
used to allow pre-printed information on the card stock to show.
If your card stock has a hologram or smart card chip, create a print process
that uses Blank Color Planes and Primer to use for those areas.
19. Cl
ick Save As and enter a name for the Retransfer Stock Set, such as
“CMYK+K+Gold+Blanking”. The Retransfer Stock Set dialog box closes and
the stock set you created appears in the list.
Card Setup
The following procedure will create a Card Setup for the card shown above. The
procedure addresses only those aspects of a Card Setup that are unique to cards
printed with an Artista VHD module. It does not address embossed data,
magnetic stripe encoding, or other card elements performed by other modules.