Installation manual

14 About the Software
Filtering Tool
The All Jobs tab also includes a filtering tool for quickly locating jobs based on
their parameters. Use the filtering tool to define specific criteria that will speed up
the search.
To search for jobs:
1. In
the left pane, select the check box next to any or all of the parameters to use
in the search. The search filter parameters are listed below. The more
parameters selected, the narrower the scope of the search. Enter the required
information for each parameter selected.
2. Click Search. The top area of the left pane changes to reflect search
parameters.
Click Clear to clear all parameters and display all jobs in the system.
Forms The total number of forms in the job
Good Forms The number of good forms in the job (supplied only if the
job has been run and contained rejects)
Reject Forms The number of rejected forms (supplied only if the job has
been run)
Priority Type The priority of the job
ProcessStepName The process name given to the job (for example,
MaxsysProduction)
Created The date the job was created
Search Filter Parameter Description
Name Enter the name of the job in the text box.
Status Select the status from the list. The program displays
only those jobs with the selected status.
Total Cards Total cards in the job. Enter a number in the text
box and select a quantitative indicator (less than,
more than, equal to, etc.) from the list.
Example: For example, enter 500 and select >=
from the list. Only jobs that have 500 or more cards
are displayed.
Column Description