Installation manual

Maxsys and MX Series Software Administrator’s Guide 15
Job Details Tab
The Job Details tab in the Production area provides information to monitor (in
real time) the status of individual cards within a job.
Depending on the fields defined in Data Setup and the columns selected, the
following information may be available for the job. (To change the columns
displayed, refer to "Choose Columns to Be Displayed" on page 17.)
Information that may be available under the Job Details tab is as follows:
Due Date (Syntera only) Enter the date range to search within.
Created (not available
on Syntera)
Enter a number in the text box and then select
Hours or Days from the list. For example, enter “5”
in the text box and select “Days” from the list, the
program displays only those jobs created in the
past five days.
Last Worked On (not
available on Syntera)
Enter a number in the text box and then select
Hours or Days from the list.
Example: Enter “8” in the text box and select
“Hours” from the list, the program displays only
those jobs worked on during the past eight hours.
Job Setup (not available
on Syntera)
Select Browse, and then select a Job Setup from
the dialog box. The program displays only those
jobs that use the selected Job Setup.
Input File (not available
on Syntera)
Enter the Input File name into the text box. The
program displays only those jobs that use the listed
Input File.
Has Rejected Products If selected, the program displays only jobs that
contain rejected products.
Has Held Products If selected, the program displays only jobs that
contain held products.
Machine Setup (Syntera
interface)
Select a machine setup value from the list.
Column Description
Record Number The number of the record within the job
Type The type of record (card or form)
Search Filter Parameter Description