Installation manual

272 ConCAD
Verification Tab
Use this tab to enable Verification functionality and set the threshold value. Select
the Verify Element Quality check box to enable.
1. Enter the Pass Threshold value in the text box.
2. Select the Camera Profile
3. Optionally choose to include Background Noise.
Color Mode There are three options for the color mode:
• Grayscale (regular)
• Grayscaled Bitstream
• Bitstream (black and white only)
Scan Mode Unidirectional lases each line of a bitmap in one
direction (left-to-right).
Bidirectional lases every other line of a bitmap in the
opposite direction (1st row: left-to-right, 2nd row: right-to-
left).
Improves the lasing speed, because the mirrors don't
have to move back before the next line, but generates
an offset between the even and odd rows and has other
related effects. As such, it is not recommended for use
when image quality is a priority.
Other Options Enhanced Edges (overshot) uses different laser settings
to increase contrast at gray level edges. An example
would be at a white-to-black or black-to-white transition.
It is recommended for most types of elements containing
black and white content (few or no gray pixels).
Examples include text, barcodes, signatures, and logos.
It should not be used for portraits.
Enhance edge mode may be slower than non-
enhanced edge mode.
Note: Enhance edge is activated by default for
bitmapped text and barcodes, deactivated by default
for bitmap images.
Negative (inverted) inverts the gray levels of the image
(black = white; white = black)