Installation manual

Maxsys and MX Series Software Administrator’s Guide 279
Solid Box Element
Use this tab to define a solid box filled with a shade of gray.
Wedge Element
Wedge elements are available only on laser templates. The start color (shade of
gray) defined below will gradually blend with the end color to create a gradient
effect.
Size Size of the box (width and height) in mm.
Fill/Border Color Use the color definition boxes to determine color.
For laser templates Gray Only must be selected to limit
the color choices to grayscale.
Border Thickness Thickness of the border, in mm.
Start Color The color (shade of gray) that will appear at the left side
of the box. Use the color definition boxes to determine
color. Gray Only must be selected to limit the color
choices to grayscale.
End Color The color (shade of gray) that will appear at the right side
of the box. Use the color definition boxes to determine
color. Gray Only must be selected to limit the color
choices to grayscale.
Levels The number of color levels (shades of gray), (2-256) that
will appear.
Width Per Level The width (in pixels) for each level. The number of levels
and the width per level determines the width of the box.
Height Height of the box, in mm.
Border Thickness Thickness of the border, in mm.
Border Color Use the color definition boxes to determine the border
color. Gray Only must be selected to limit the color
choices to grayscale.