Installation manual

Maxsys and MX Series Software Administrator’s Guide 35
Using QuickConnect
You can also use the QuickConnect method for loading CSM jobs.
1. Reconfig
ure the CSM option.
A. In Diagnostics (Applications | Utilities | Diagnostics), select Controller
from the module list.
B. Under the Controller Configuration
Editor tab, double-click System from
the list to expand it and then expand CSM Client.
C. Und
er CSM Client, select Enable and then set the value to "false" on the
top bar by double-clicking the "true" value and selecting the option button
in the pop-up box.
D. Cl
ick Commit to save the changes.
2. In the Production window (Applications | Production), click the Load button
on the upper status bar.
3. Select the CSM tab at the bottom of the dialog box.
4. Click Browse and then select the directory into which the downloaded
production files will be saved.
5. In
the Record Separator field, specify a separator sequence to be used for
separating records. This option is only for fixed record lengths. Use the \x
escape character to enter hexadecimal numbers.