Installation manual

46 Production
5. Click OK. The Split Job dialog box opens, confirming at what record index
number the job split. The split job appears in the My Work folder as <Job
Name.S1>
Remake jobs cannot be split.
If a job is partially complete (that is, some of the products have a status other
than "none"), you can split only the unattempted cards into the new job.
If any unattempted cards are related to cards that have already been
attempted (that is, multi-card ac
counts), the related unattempted cards will
stay with the original job.
Searching for Jobs
Perform the following steps to search for jobs within the database:
1. In the
Production window (Applications | Production), select the All Jobs
tab. (On the Syntera interface, also select the My Work tab.)
2. I
n the left pane, select the check box next to any or all of the parameters on the
jobs list that you would like to use in your search. The more you select, the
narrower the scope of the search.
• Name - Enter the name of the job in the text box.
• Sta
tus - Select the status from the list. The program displays only those
jobs with the selected status.
• Total Cards -
Total cards in the job. Enter a number in the text box and
then select a quantitative indicator (less than, more than, equal to, etc.)
from the list. For example, if you enter 500 in the text box and select the
greater-than-or-equal-to (>=) sign from the list, the program displays only
those jobs that have 500 or more cards.
• Due
Date (Syntera only) - Enter the date range to search within.
• Created (not
available on Syntera) - Enter a number in the text box and then
select Hours or Days from the list. For example, if you enter "5" in the text
box and select "Days" from the list, the program displays only those jobs
created in the past five days.
• La
st Worked On (not available on Syntera) - Enter a number in the text box
and then select Hours or Days from the list. For example, if you enter "8"
in the text box and select "Hours" from the list, the program displays only
those jobs worked on during the past eight hours.
• Job Setup (not available on Synter
a) - Select Browse, and then select a Job
Setup from the dialog box. The program displays only those jobs that use
the selected Job Setup.