Installation manual

80 Card Setup
Creating a New Card Setup
If you are creating a Card Setup that is similar to an existing Card Setup, it is
often faster and easier to save the existing Card Setup as a new setup and
modify it to suit your needs. Refer to "Creating a New Card Setup from an
Existing Card Setup" on page 82.
There can be only one Card Setup open at a time. Make sure that you save
the new setup before opening another.
To create a new Card Setup, complete the following steps:
1. Select Applications | Setups | Card Setup.
2. In
the Card Setup window, click New on the toolbar. A new Card Setup form
opens that depicts a blank card setup with a virtual card on the left side and a
Properties view on the right.