Installation manual

82 Card Setup
• Define the properties as required, based on the element type. (For more
information, refer to "Defining Element Properties" on page 91.)
• Select the Advan
ced tab for access to advanced features.
6. Click the Save icon on the toolbar when finished to save the Card Setup.
If the setup you created does not conform to basic design requirements, a
warning message appears and you are not allowed to save the setup. Click
the Warning button to display a window that lists the warnings or errors
that may prevent cards from being produced successfully.
Creating a New Card Setup from an Existing
Card Setup
If you are creating a new Card Setup that is similar to an existing Card Setup, it is
often faster and easier to save the existing Card Setup with a new name and then
modify it to suit your needs.
To save an existing Card Setup as a new
Card Setup, complete the following
steps:
1. F
rom the Card Setup window (Applications | Setups | Card Setup), open
the Card Setup to copy.
2. Cl
ick the Save As icon on the toolbar.
3. Enter
a new file name in the File Name field and modify properties as
needed.
4. Cl
ick Save to save the Card Setup with the new name.
No Selection Criteria (associated with a Card Setup) is saved when you
use the Save As function.