User guide

Appendix D - FLASHutils 109

12 Appendix D - FLASHutils

A small utility to update firmware from a binary file.

1. Insert the CD into your CD ROM drive. The installation will start automatically. (If 'autostart' is

turned off on your computer, you will need to open the CD on your computer, double-click on

'setup.exe.'

2. Follow the prompts to install the software. When finished, under Start>All Programs>Datacom

Systems open FLASHutils. A window will display, select the Product Selection from the drop down

list, browse to find the binary file (i.e., C:\Program Files\DSI\, input the IP address of the product

and click the Program box to begin.

3. Provide Login information, Username: Administrator (default), Password: admin (default), click

the Login box to continue.

4. Programming Status window opens to display the programming operation. Erasing the micro

should begin within 30 seconds, followed by

Updating MicroProcessor. The firmware update will take three to four minutes. CAUTION: Do not

interrupt the programming process, otherwise you may be unable to access the unit.

5. When the firmware update is complete the product will automatically reboot.