User guide

SS-1200-S, SS-2200-S and SS-4200-S Series Link Aggregating Taps46

Step 13. Type exit to save the network address changes and press the Enter key to end the

connection session indicated by 'Connection closed' response.

Step 14. Close HyperTerminal, disconnect the DRL512-2M-R serial cable and install the SS-

1200-S series, SS-2200-S series or SS-4200-S series SINGLEstream in your chosen network

location.

4.4.2 IP Address Configuration with TELNET

The IP address of the configurable series can be configured via a RJ45 connection with a TELNET

application (available on most Windows PCs) or an open source free software terminal emulator for

MS-Windows.

Step 1. Connect the SS-1200-S, SS-2200-S or SS-4200-S with one of the supplied switching AC

adapters and AC line cords into an external power source. Either POWER 1 or 2 LED illuminates

green indicating power is available from the connected source. The other POWER LED is not

illuminated, indicating a lack of power to the unconnected DC power socket.

Step 2. Using a cross-over Cat 5e cable, connect one end to the SS-1200-S, SS-2200-S or SS-

4200-S MANAGEMENT port and the other end to the RJ45 port on your management PC.

Step 3. Check the PC Local Area Network Connection by selecting START > Settings > Control

Panel > Network Connections