User Manual

Page 4 of 9
6. After a few moments the bind should proceed. If successful, the keypad
will revert to it’s normal prompt, Enter Code # and you can proceed to
the Test section of this document. If it fails the keypad will display Bind
Failed! you should redo the above steps. It is better to perform the
steps as quickly as possible.
5: Test the Keypad
A simple serial test application has been provided for your convenience. Any
terminal emulator software will suffice. Make sure you have completed all of the
above steps.
Run the supplied test application. You should see the following screen:
Click on the COM Port drop down box. You will be given a choice of all available
COM ports on your system. The following diagram shows a typical result: