User guide

Unpacking the SS8460
96-30052-001 Rev. A4 DataDirect Networks StorageScaler 8460 User Guide | 17
2.2 Unpacking the SS8460
CAUTION : Please read all the safety precautions listed in Preface of this manual
prior to unpacking the SS8460 enclosure.
2.2.1 Racked System
If your system is already installed in the racks, refer to the DDN 42U/ 45U 28" Wide Rack
Installation and Service Guide for instructions on removing the system from the shipping
crate and positioning the system.
Removing Shipping Screws
There are four shipping screws installed on the front panel that secure the enclosure for
transit in a rack (Figure 12).
These screws must be removed before the enclosure can be pulled out for disk module
installation.
2.2.2 Packing List
Your SS8460 ships with the following:
• SS8460 enclosure
• Two power cables
• Rack-mounting hardware
• Cable management hardware
• Disk modules
• Blank modules (if ordered)
Before you unpack your SS8460, inspect the shipping containers for damage. If you detect
damage, report it to your carrier. Retain all boxes and packing materials in case you need to
store or ship the system in the future.
Figure 12. Shipping Screws on Front Panel