User guide

Installing the SS8460 in a Rack
96-30052-001 Rev. A4 DataDirect Networks StorageScaler 8460 User Guide | 21
5. Attach the two rack rails to the front and rear supports of the rack as shown in
Figure 17. Do NOT tighten screws yet.
NOTE : The rails are marked “R” (right) and “L” (left) viewing from the front of the
enclosure. Do not exchange the rack rails.
- Adjust the lengths to fit the depth of your rack.
- At the front, use one screw plate and five #10-32½" flat head screws for each rail.
- At the rear, use one screw plate and five #10-32½" flat head screws for each rail.
Figure 17. Attach Rack Rails to Rack
Front of Rack
Rear of Rack