Installation manual

IQ3 Data Logger Dash Installation Manual

PC Software Requirements

The DataLink II software is compatible with Windows 98 Second Edition, ME, 2000, XP and Vista

32. If you have a Windows operating system other than those listed above please contact

Racepak for additional installation assistance. DataLink is not compatible with Apple.

Software Installation

To install the DataLink II software on your PC, perform the following.

1. Turn on the computer and start Windows.

2. Insert the CD labeled Racepak DataLink II Software into the CD drive.

3. The RacePak DataLink II Setup program will automatically start, and the setup

InstallShield Wizard will be displayed. Please note—If you have disabled auto run in your

computer the installation wizard will not automatically start.

4. To manually start the installation program; Select My Computer from the computer

desk top, select the CD drive by clicking on it and double click on Setup to start the

installation program.

5. Read the instructions on the dialog boxes and answer any questions required.

We recommend you install the software in the default directories as indicated during the

installation procedure. This will make it easier for our technicians to assist you at a later date

should you have an application problem. If you install the software in a directory other than

the default directory, please note the install directory, in order to assist our technicians should

a problem arise.

The Install Wizard will automatically create a shortcut on the main desktop for the

RacePak DataLink II program.

MicroSD Flash Card Reader Installation

Data recorded by the IQ3 is stored on a 512MB microSD memory card. In order to transfer the

data to the user’s PC, it is necessary to utilize a microSD memory card reader. A microSD card

reader is included in the IQ3 kit package. The reader requires you to use the provided microSD

adaptor and an available USB port on your PC.

The microSD memory card reader provided with the IQ3 does not support Windows 95 or

Windows 98 operating systems.