Installation manual

IQ3 Data Logger Dash Installation Manual
36
Warnings
The IQ3 provides the ability to program up to four individual warning channels. The face of the
dash contains four warning lights. Each warning light is associated with a single warning
channel. To program each individual warning channel.
1. Select the “Warnings” tab.
2. Next, left click on the warning light you would like to program. This action will open the
Warning Light text box.
Warning Parameter Description
Warning Channel Sensor input to be used to trigger warning.
Low Warning Limit Sensor value to trigger warning when below this value.
High Warning Limit Sensor value to trigger warning when above this value.
Channel Tag Text to be displayed above warning channel value when warning is
activated. 5 chars max.
Channel Value is Inside Warning Limit
Window
Triggers warning when sensor value is between Low and High
Warning limits.
Channel Value is Outside Warning Limit
Window
Triggers warning when sensor value is below Low Warning Limit
and above High Warning Limit.
Warning Input 1 AND Warning Input 2
Conditions Are Met
Requires that warning 1 and warning 2 conditions are met to
activate warning.
Warning Input 1 OR Warning Input 2
Conditions Are Met
Requires that warning 1 or warning 2 conditions are met to
activate warning.
Warning Tag Text displayed to the left of warning channel value(s) when
warning is activated. 5 chars max.
On Delay Time Time is seconds to delay before warning is activated.
Turn On External Warning Turns on external warning when warning channel is activated.
The following section provides an example warning setup.