Installation manual

IQ3 Data Logger Dash Installation Manual

Boat Racing Configuration

Prop Data Math Channels: Racepak personnel have installed a set of math channels that

provide data specific to boat racing analysis. This allows graphing and reviewing of prop data in

the main graph area, but has no affect on Prop Slip settings as programmed in the dash.

Prop Speed

Channel name: Prop Speed

The Prop Speed channel is derived from the input of Engine RPM, Gear Ratio, Prop Pitch and

internal mathematical functions. To activate channel, complete the Prop Data Runlog page.

Prop Slip

Channel name: Prop Slip

The Prop Slip channel is created from the input of GPS MPH and prop speed.

Session Info and Weather

1. Session

2. Weather

3. Run Comments

Provides an input area for run numbering data, weather conditions and comments. Data is

inserted by the user, as needed

Map Setup

1. Create GPS Map

2. Add Map Segments

3. Add Inside - Outside Track (optional)

Provides an input area to create and segment track data. Additional information can be found

in the following section.

Map Analysis

1. Map Report

2. Lap Zoom

3. Segment Report

4. Segment Compare

5. Speed Compare

6. Min Max Avg Report

7. GG Plot

Provides an input area to review and analyze data. Additional information can be found in the

following section.