Installation manual

IQ3 Data Logger Dash Installation Manual
54
Session Dialog Window
When data is downloaded to the user’s PC, a
download “path” must be created. This process
automatically creates a series of folders for the
downloaded data.
The folders are named based on the number entered
into the Year input box and the location entered into
the Track input box.
It is only necessary to enter the Year one time,
according to the year of testing. It is also only
necessary to enter the Track name one time, at each track.
At the same time, a number must be assigned to the Runfile before the file can be placed into
the designated folder. The Session page provides the ability to assign both the run number and
the location in which to save the Runfile.
An example data path: C\RacepakData\IQ3\2008\Daytona
If 2008 was entered for the Year and Daytona for Track, the above set of folders (or directory)
would be created on the user’s C drive. The Runfile number is assigned according to the date,
location and run number.
1. Enter the appropriate information in the Session dialog box and select Next.