Installation manual

IQ3 Data Logger Dash Installation Manual
68
Speed and Segment Reports
Following creation and segmenting of the GPS track map, the segment times will be now be
available for review in the Runlog Page area. To view:
1. Insure a lap is open and in view
2. Select the Speed Summary Runlog Page tab, found at the bottom of the DataLink II screen.
3. Detailed information concerning segment times, entrance and exit speeds, along with
minimum, maximum and average speeds are now available for review.
The Segment Report page provides detailed segment timing information for all laps contained
within the currently open Runfile.
The Segment Compare page provides the ability to compare segment timing information for
two selected laps. To do so requires the user to choose two laps, for comparison. This action,
called Main and Reference lap selection, which is covered in the Advanced Features of the
Datalink II Software section. The procedure is simple, and takes just a matter of seconds to
perform.