Installation manual

IQ3 Data Logger Dash Installation Manual
76
How to Determine the Currently Graphed and Active Channel
When graphing and reviewing multiple channels, the location of the
mouse cursor in the Main Graph area is indicated by an X. The X
represents the channel that the mouse cursor will follow, when
moving left and right in the Main Graph area. As previously discussed,
the Channel Buttons display the current values for each channel,
according to the cursor position in the Main Graph area.
To determine which channel the X is following, simple look at the Channel Grid Display, found
at the top, right corner of the Main Graph area. In addition to noting the current active
channel, the Channel Grid Display can also provide:
1. Val: The current channel value, according to cursor position in the Main Graph Area
2. Avg: The average value for the active channel. This is determined by averaging the values
for the channel as displayed in the entire Main Graph area.
3. Min: The minimum value obtain, over the entire Main Graph area
4. Max: The maximum value obtained, over the entire Main Graph area
5. Avg Time: The average time period for the entire Main Graph area or as determined by
placing average cursors in the Main Graph area.
To move (toggle) the mouse cursor to the next graphed channel:
1. Place the mouse cursor over the Channel Grid Display.
2. Left click the mouse button. This action will update the Main Graph scaling to
reflect the next graphed channel shown in the Channel Grid Display. Continue
left clicking to toggle through all graphed channels. The TAB key on the keyboard
will also perform the same function.