Specifications

i50 Manual (5.10)
Page 57
© 2015 Datalink Systems, Inc.
www.datalinksystemsinc.com
ID
Name
Description
Default
35
I_RFSPEED
RF COM Speed. See note at bottom for values
4
36
I_TRANSSPEED
Transparent COM Speed. See note at bottom for values
4
37
I_WAYPT
Enable Waypoint reports (1=Yes 0=No)
0
38
I_USEDISTLO
Use city distance reports (1=Yes 0=No)
0
39
I_USEDISTHI
Use highway distance reports (1=Yes 0=No)
0
40
I_USETIMELO
Use city time reports. Bit 0=Enable. Bit 1=Don’t send while IGN off. Bit 2=Don’t
send while stationary
0
41
I_USETIMEHI
Use highway time reports (1=Yes 0=No)
0
42
I_USEOVERSPD
Send overspeed alerts (1=Yes 0=No)
0
43
I_USESTOPS
Send Stop alerts (2=Position Only 1=Send Event 0=No)
0
44
I_USESTARTS
Send Start alerts (2=Position Only 1=Send Event 0=No)
0
45
I_USEACCEL
Use accelerometer to detect motion, instead of OBD or GPS speed (1=Yes
0=No)
1
46
I_USEINTGPS
Use internal GPS (1=Yes 0=No)
1
47
I_GSSPEED
Globalstar COM Speed. See note at bottom for values
11
48
I_GPSSPEED
GPS COM Speed. See note at bottom for values
7
49
I_JSPEED
OBD-II COM Speed. See note at bottom for values
7
50
I_TRANSBITS
Transparent COM settings. Bits 0-1=(Data bits-5). Bit 2=Extra Stop bits. Bit
3=Parity. Bit 4=Even
3
51
I_JREPDIAG
OBD-II diag codes events 0=Off 1=Display 2=Send 3=Display and Send
0
52
I_JREPREV
OBD-II high rev events. See I_JREPDIAG for values
0
53
I_JREPBRK
Not used
0
54
I_JREPACC
Not used
0
55
I_JREPCOOL
OBD-II high coolant temp events. See I_JREPDIAG for values
0
56
I_JREPTRANS
Not used
0
57
I_JREPOIL
Not used
0
58
I_JREPFUEL
Not used
0
59
I_IPMODEMTYPE
0=External GPRS 1=Cypress CDMA 2=AirLink CDMA 3=Internal GPRS
4=Enfora GPRS 5=BlueTree CDMA
3
60
I_JREPOILPRESS
Not used
0
61
I_MINSATS
Number of GPS sats required for valid signal. Range=0-12
0
62
I_DIALSPEED
Dial-up and messaging/status port COM Speed. See note at bottom for values
9
63
I_GPRSECHO
Enable PPP echo requests (1=Yes 0=No) Normally disabled
0
64
I_PREVIP1
Cellular backup IP address (also uses I_PREVIP2-I_PREVIP4)
0
65
I_PREVIP2
"
0
66
I_PREVIP3
"
0
67
I_PREVIP4
"
0
68
I_GSIP1
Globalstar IP address (also uses I_GSIP2-I_GSIP4). Range=0-255
-
69
I_GSIP2
"
-
70
I_GSIP3
"
-
71
I_GSIP4
"
-
72
I_PREVGSIP1
Globalstar backup IP address (also uses I_PREVGSIP2-I_PREVGSIP4)
0
73
I_PREVGSIP2
"
0
74
I_PREVGSIP3
"
0
75
I_PREVGSIP4
"
0
76
I_IRIDIUMSPEED
Iridium COM Speed. See note at bottom for values
9
77
I_BUFFERGPRS
Enable position buffering on GPRS network (2=Polling 1=Yes 0=No)
0