User Guide
25"
!
!
!
2
Select ISO Click the Select ISO button to select the ISO image you would like
to upload to the DL3™ drive.
3
Update Then click the Update button to upload the ISO image to the DL3™
drive. This will finalize the steps to mount an ISO image on the DL3™. If
successful, Windows will display Drive Autoplay dialog window.
4
Format You should only click the Format button if you wish to clear the
Virtual CD partition. This function will not destroy your DL3™ drive contents. To
mount a different ISO image file, formatting the Virtual CD is not required.
Simply select a different ISO image and then select the Update function.
Note:
• The DL3™ will only support ISO images up to 4.7GB in size.
• The new Virtual CD partition will NOT be encrypted; however, it will be
“Read Only” and accessible only after entering the correct user or
administrator password.
• For instructions on creating an ISO disk image, please consult your
operating system instructions.