User Guide

26"
!
!
!
READ-ONLY MODE
The DL3 FE™ drive comes with read-only mode. This feature is disabled by
default but can be enabled by the administrator. Once the feature is enabled,
only the administrator will be able to remove and/or modify the contents of the
files on the drive. Users of a DL3 FE™ drive that is read-only mode enabled can
still view the files and copy them, but they will not be able to save any changes
to the files on the drive nor delete them.
To enable read-only mode, follow these steps:
Step 1: Connect the DL3 FE™ drive to your computer.
Step 2: Enter the administrator password and press the
[↵ ] symbol.
Step 3: Press the [SETUP] button on the touch screen.
Step 4: At the setup menu, press the [SYSTEM] button.
Step 5: Press the button two times to arrive at the
[SYSTEM 3/3] screen.
Step 6: Select [READ-ONLY MODE].
Step 7: Change to [ENABLE].