User Manual
Table Of Contents
- Introduction
- Getting Started
- Simple Tests
- Quantitative Quantitative Tests
- Transmitter Only Transmitter Only
- Receiver Only
- Loopback Test Mode
- Configuration Commands
- Built-in-Self Test (BIST) Routines
- Miscellaneous Test Routines
- Persistent Store Keys
- Appendix 1 BIST Parameters
- Appendix 2 Known Software Issue(s) in BlueTest Version 1.4
- Appendix 3 Combining Tests Using a Second Unit
- Appendix 4 Configuration Commands Available During Tests
- Appendix 5 Bluetooth Packet Types
BlueTest Instruction Manual
bc01-an-047b
© Copyright CSR 2001
This material is subject to CSR’s non-disclosure agreement.
Page 50 of 56
BlueCore
TM
01
Name Type Min Max Meaning
chan1
uint16
0 78
Bluetooth channel number
chan2
uint16
0 78
Bluetooth channel number
n_samples
uint16
0 65535
Number of samples in range from min
to max for IF filter response test
lo_offset
uint16
0 65535
Min offset in 1/4096MHz for IF filter
response test
hi_offset
uint16
0 65535
Max offset in 1/4096MHz for IF filter
response test
output_mask
Uint8
0 FF
Bit mask for PIO; 0=input, 1=output
output
Uint8
0 FF
Bit values for PIO output
xtal_trim
Uint16
0 63
Crystal trim value
uap
Uint16
0 FF
Bluetooth address; Upper Address
Part
Lap 0 FFFFFF
Bluetooth address; Lower Address
Part
Trim
Uint16
0 511
Value for configuring IQ trim
n_errs
Uint16
0 15
Number of errors
Lvl
Uint16
0 15
Local oscillator output level
tx_offset
Uint16
0
Transmitter offset
lo_offset
Uint16
0
Local oscillator offset
radio_on_offset
Uint16
0
Time between turning radio on and
starting to transmit in microseconds