User's Manual
Table Of Contents
- Falcon® 4400 Series
- with Windows® CE
- Quick Reference Guide
- Table of Contents
- Falcon® 4400 Series with Windows® CE
- Appendix A: Datalogic Mobile Falcon® Windows® CE Series End User License Agreement
- Appendix B: Microsoft® Windows® CE End User License Agreement
- Appendix C: Datalogic Mobile Falcon® Windows® CE Product Series Warranty
- Appendix D: Safety Information
- Appendix E: Laser Safety
Setting Up the Mobile Computer
16 Falcon
®
4400 Series with Windows
®
CE
Setting Up the Mobile Computer
At first use or after a cold reset, the unit will go through a series of initial
bootup sequences. Each of these sequences are described as noted:
1. Touchscreen Calibration, illustrated in Figure 7.
2. Getting Connected on page 16.
3. IP Network Setup on page 17.
4. Setting the Date and Time on page 19.
Touchscreen Calibration
Figure 7. Touchscreen Calibration
Getting Connected
Bluetooth Setup
1. Open the Bluetooth control panel at Start > Settings > Control Panel >
Bluetooth Manager
.
2. Search for available Bluetooth Devices by tapping the button for the type of
device you want
(Printer, Serial or All) .
3. Create a pairing by double tapping the listing for the device you want and
selecting the service. If you want to specify encryption or require authentica-
tion, enable the appropriate checkbox.
4. Tap
OK to complete.
For detailed instructions, reference the PRG.
Follow the on-screen directions to cali-
brate the touchscreen.
For more information on touchscreen
calibration, refer to the PRG.