User's Manual
Table Of Contents
- Falcon® 4400 Series
- with Windows Mobile®
- Table of Contents
- Falcon® 4400 Series with Windows Mobile®
- Appendix A. Datalogic Mobile Falcon® Windows Mobile End User License Agreement
- Appendix B. Microsoft® Windows Mobile Addendum to EULA
- Appendix C: Datalogic Mobile Falcon® Windows Mobile® Product Series Warranty
- Appendix D: Safety Information
- Appendix E: Laser Safety
Setting Up the Mobile Computer
18
Falcon
®
4400 Series with Windows Mobile
®
Communications Setup
Bluetooth Setup
1. Open the Bluetooth control panel at > Settings > Connections >
Bluetooth.
2. Tap
Scan Device to search for available Bluetooth Devices.
3. Double tap the listing for the device you want to activate. Specify the device as
Trusted, and authenticate if needed.
4. Double tap again and select
Active to activate the device.
For more detailed instructions, refer to the PRG.
IP Network Setup
1. Select > Settings > Network and Dialup Connections.
2. Double-tap on the item (varies based on the radio installed and the number of
connections).
3. Complete the two tabs (shown in Figure
12):
Figure 12. Modifying Network Connection Settings.
• IP Address: Select DHCP or set static IP settings.
•
Name Servers: If using static IP, set DNS and WINS servers.
RF Setup (Summit Client Utility)
The Summit Client Utility (SCU) is an application designed for users and administra-
tors of mobile devices that use a Summit radio module. Using SCU, you can:
• Disable and enable the radio (turn it off and on)