User's Manual

Entering Data
Quick Reference Guide 19
• View the contents of configuration profiles, or configs, each of which houses
the RF, security, and other settings for the radio
• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config
• View status information on the radio, the access point (AP) or WLAN router to
which it is connected, and the RF connection or link between the two
• Troubleshoot a connection or performance issue, view in-depth diagnostic
information on the connection and the radio, and perform various trouble-
shooting and diagnostic tests
1. To launch the utility go to
> Settings.
2. Tap on the
Wi-Fi icon.
For more detailed information on making changes to settings, please refer to the PRG.
Radio Card Setup
Windows Zero Config should be used to administer the radio setup. For assis-
tance in configuring the radio card, reference the online help on your Falcon.
Go to
> Help for further information.
Entering Data
To open an application, tap a link on the Today page, or tap > Programs to
display a
list of available programs. Tap a program icon to open it.
There are several ways to enter data with the Falcon:
• Use the keypad. Refer to Keypads starting on page 25.
• Use the stylus on the touchscreen display. Refer to Using the Stylus on
page 20 for more information on using the stylus.
• Use the on-screen keyboard by tapping with the stylus. Refer to On-
Screen Keyboard on page 23.
• Select text. Use the stylus to highlight the desired text by dragging the
stylus across the desired text, double-tapping to select one word, and
triple-tapping to select an entire paragraph.
• Use the bar code scanner or imager to enter data. Press the trigger or
scan button (26 or 52-key only) to initiate a scan. The scanned data
will be entered into the current application’s open file. Refer to Scan-
ning Bar Codes starting on page 34 for more information on using
the scanner.