User's Manual
Table Of Contents
- Falcon® 4400 Series
- with Windows Mobile®
- Table of Contents
- Falcon® 4400 Series with Windows Mobile®
- Appendix A. Datalogic Mobile Falcon® Windows Mobile End User License Agreement
- Appendix B. Microsoft® Windows Mobile Addendum to EULA
- Appendix C: Datalogic Mobile Falcon® Windows Mobile® Product Series Warranty
- Appendix D: Safety Information
- Appendix E: Laser Safety
Scanning Bar Codes
34
Falcon
®
4400 Series with Windows Mobile
®
Scanning Bar Codes
Laser Scanning
To use the scanning function on units containing a laser scanning module,
complete the following steps:
1. Select and open a bar code application, such as Microsoft
®
Word
Mobile.
Figure 26. Scanning a bar code
2. Aim the scan window at the bar code following the guidelines outlined
in Figure 27.
3. Press
<Scan> on the keypad (26, 52 and 52-key NU only) or the Scan
Trigger on the handle. The laser scans as long as you hold the button or
trigger until a good scan is obtained. There is a 10-second timeout for
attempting to scan.
4. Aim the laser beam at the center of the bar code.
• Position the unit close to the bar code when scanning small bar
codes.
• Position it at a distance when scanning larger bar codes.
• The laser is disabled after you release the key or after 10 seconds,
or once a good scan is obtained.
Press <Scan> (on 26 and 52-key) or the Scan
Trigger to initiate a scan with the Falcon.